- #ANYTONE AT D868UV SOFTWARE INSTALL#
- #ANYTONE AT D868UV SOFTWARE SOFTWARE#
It will stay that way until you change the channel or power cycle the radio. The current group is then set to that person's ID.
Highlight the person that you want to begin a Private Call with and press the PTT. Highlight "Call Log" and select it (using the green button). If you want to open a private call with someone that you you've recently heard on the radio, there is an easier way to do that. You'll notice the override no longer works. Press the PTT when you are done to confirm you did it right (by looking at the talk group ID during transmit), then turn the knob right one, and left one, to come back and then press the PTT again. Note: There is a YouTube video HERE on doing the upgrade. You will now need to reprogram the radio with the code plug you saved in step. I did a factory reboot by turning the radio off and then back on by pressing the PTT and the PF1 (right under the PTT) and then turning it on while doing that. The instructions recommend you do a factory reset (erases all data). Red light blinks differently but I didn't notice #ANYTONE AT D868UV SOFTWARE INSTALL#
Open the update you want to install (click the "Open Update File).The red light should flash and the screen is blank Turn HT ON while holding the PTT and the ORANGE button.Turn HT ON and when you bring up the updating software, it should be able to see the HT.
#ANYTONE AT D868UV SOFTWARE SOFTWARE#
Make sure you have the com port software installed and the HT plugged into the computer.Make sure you have a copy of your code plug and any changes.Download the latest firmware and PC programming software from your distributor.
0 kommentar(er)
